E ‐ Life offers a series of pre-engineered Softeners to meet the needs of Household, Small and Medium Industries. The water Softeners utilize a strong acid Cat-ion resin in the Sodium form to exchange the hardness salts in the raw water. Options are available in Mild steel and FRP vessels. Softeners are available as manual, semi-automatic and fully automatic versions to suit client's specifications and requirements.

Ion Exchange Process

Hard water - water with a high calcium/magnesium content-enters the softener through the “In” port indicated by the green arrow. It passes through the control valve and into the tank, where it goes from top to bottom through a specially prepared resin that “softens” it.

The resin consists of specially manufactured beads that have been saturated with sodium ions. “Softening” occurs as the hardness minerals in the water attach themselves to the resins and are “exchanged” for sodium.

The softened water then enters the long center tube, called a riser, via the strainer basket in the bottom of the tank and passes upward through the riser. The water exits the softener via the control valve (blue arrow) and is sent to the home.

When the resin becomes saturated by hardness minerals, the softener has to be regenerated via Multi-Port Value manually or automatically based on Litres of water pumped out. It can automatically go into regeneration (The regeneration process is initiated by a timer or a meter, depending on Auto Multi-Port Valve). By this process, the hardness minerals are washed down the drain (via a drain tube not shown in the diagram), and the resin bed is rinsed, resettled, and recharged with sodium. It is now again ready to soften your water.

The regeneration process is accomplished by passing very salty water from the brine tank through the resin.

Nano Soft-no-r:

Why always pollute water with Sodium using water softeners? Watch Water got a neat and clean chemical free scale prevention and corrosion prevention FILTERSORE®SP3 media to convert hardness minerals to harmless inactive Sub-micron crystals, making SOFT-NO-R series systems, the truly effective alternative technology to water softeners for the prevention of scale due to water hardness.

  • FILTERSORB® media does not remove healthy minerals or add sodium to the water supply.

SOFT-NO-R systems can be installed as a pre-treatment to all reverse osmosis. No control valve, no electricity, and no waste water-an absolute environmentally friendly ‘GREEN’ technology. Simple sizing and installation - all you need to know is pipe size and the peak flow rate. Perfect systems for today and future for homes, towns and all communities where water softeners are banned. SOFT-NO-R systems are maintenance free, no salt bags or other chemicals to add constantly

Benefits:

  • Scale Prevention: Scale deposits cause blocking and the failure of the water flow systems in household appliances (Washing machine dishwasher, coffee machine, etc). A huge replacement cost for the pipes and the systems affected by the water hardness can be avoided using WATCH® SOFT-NO-R The shower, faucets, bath, and sinks are now without the trace of any scale and washed clothes are cleaner and have the softness and nice colors
  • Hygiene: WATCH® SOFT-NO-R scale prevention unit treated water is enriched with naturally occurred CO2 in the water. The benefit & essence of Co2 enriched water is medically proven, that helps with skin problems, lusterless hair and has many therapeutic applications.
  • Health: Unlike any water-softening unit that works on the basis of ion-exchange that takes out Calcium and Magnesium from the water and pollute it with unhealthy Sodium. WATCH® SOFT-NO-R Scale prevention unit preserves the two essential minerals Calcium and Magnesium in the water. Thus making the water the best natural-mineral enriched drink available.
  • Economical: WATCH® SOFT-NO-R scale prevention unit is very economical in the long run. Easy installation, easy setup, no power consumption, no drain, no backwash, no salt consumption, no chemicals, and almost no maintenance is necessary.

 

SOFT-NO-R System assembly:

SOFT-NO-R System is very easy to install. You save your time, money & maintenance costs.

The main four components are

  • SK Head
  • Riser tube
  • Bottom Distributor
  • Pressure Vessel

Magnetic Water Conditioner:

The OneStop Plus™ system is designed to protect open circuit pipes from scaling. Additionally, it reduces the amounts of heavy metals such as copper, lead, mercury, zinc and cadmium. It can be installed as Point Of Entry device, for both cold and hot water, or directly before the apparatus that needs to receive treated water (sauna, dishwashers, washing machine etc.).

OneStop Plus™ avoids scale by interacting with the scale molecules, turning them into harmless crystal (TAC system). These crystals are now suspended in the water but do not attach to surfaces and are simply washed away. In this way the scaling on the surfaces and in the pipes is dramatically reduced. OneStop™ is NOT a softener, it is a water conditioner. The water treated by OneStop Plus™ keeps the original healthful minerals while solving the scaling problems.

Specifications:
The OneStop Plus™ system is a finished product, ready to be installed and used. All that is needed for installation is to connect the IN and OUT pipes. The install­er has to carefully check pressure, temperature and perform a chemical analysis of the water, in order to assure the full compatibility of the installation with the limitations of use, as declared below.

Features:

  • Prevent scaling without using chemicals
  • Cost effective and eco-friendly
  • Also reduces heavy metals such as copper, lead, mercury, zinc and cadmium
  • No maintenance, free of salt or other chemicals; no more heavy products to carry around
  • No regeneration or back wash needed
  • Increases the efficiency of boilers and all other equipment in contact with the treated water
  • Easy to be installed, no electricity and no backwash pipes needed
  • Compatible with all the other water treatment devices already installed
  • Solves the typical problems of standard softeners